Tieline Merlin PLUS User Manual page 78

78 Merlin PLUS WNET Manual v2.0
9. Select the Dial Route to use for this audio stream if one is required, then press the
Note: See Configuring POTS Answering
tags. These can be useful when routing multiple audio streams.
10. Navigate to Auto Reconnect and press the
required.
11. Select Module Configuration to adjust other settings specific to how you want POTS
modules to dial and answer, e.g. Maximum connection bit rate and dial tone settings etc.
12. When configuration is complete press the RETURN
Connect POTS screen.
Important Note: At this point you can navigate to Save on the Connect POTS screen
and press
the program.
13. Press the CONNECT
appears during the connection process.
Note: To load a saved program and dial press the HOME
select the program you want to dial and press the CONNECT
dial.
14. To negotiate higher bit rates press
press then 9.
Important Note: To load a saved program and dial press the HOME
navigate to Programs, select the program you want to dial and press the CONNECT
button to load the program and dial.
for more information on Dial Route and Answer Route
to use the numeric KEYPAD to name the program. Then press
button to make a connection. The Wait Connecting screen
button to Enable or Disable this setting as
button to navigate back to the
button, navigate to Programs,
button to load the program and
then 3 on the numeric KEYPAD; for lower bit rates
button.
to save
button,
© Tieline Pty. Ltd. 2017