Tieline Merlin PLUS User Manual page 259

4. Select IPv6 Mode and press the
5. Select Auto, Manual or Off and press the
By default the codec is configured to allow the codec to automatically receive IPv6 address
information from an IPv6 enabled router.
Manual IPv6 Address Assignment
Select Manual mode using the previous procedure and enter information into the IPv6 Static
(Address), IPv6 Prefix and IPv6 Gateway fields in the codec to manually configure address
details.
DNS Server
It is possible to specify Domain Name Server (DNS) settings to allow easy look up of codecs within
the specified DNS Addresses or Domains section within the Web-GUI. This feature can be turned
on or off in the LAN codec menu.
1. Press the SETTINGS
2. Select Network and press the
3. Use the down
press the
4. Select IPv6 Mode and press the
5. Use the down
6. Use the down
7. Press the
VLAN ID (VLAN configuration only)
The VLAN ID is encapsulated in IP packets to facilitate routing throughout your network.
1. Press the SETTINGS
2. Use the navigation buttons on the front panel to select Network and press the
3. Use the down
4. Navigate to Config and press the
5. Select Usage and press the
6. Select the mode of operation for this VLAN (e.g. Control & Streaming, Streaming only,
Control Only) and press the
7. Use the down
8. Press the
9. Press the
VLAN Priority (VLAN configuration only)
The VLAN Priority setting represents a prioritization scheme for forwarding data packets throughout
Virtual Local Area Networks.
1. Press the SETTINGS
2. Use the navigation buttons on the front panel to select Network and press the
3. Use the down
4. Navigate to Config and press the
© Tieline Pty. Ltd. 2017
button.
button.
navigation button to select ETH1, ETH2, Wi-Fi or a VLAN interface, then
button.
navigation button to select ETH1, ETH2 or a VLAN interface.
navigation button to scroll to Auto DNS.
button to toggle between Yes and No.
button.
navigation button to select a VLAN interface and press the
button.
button.
navigation button to scroll to VLAN ID.
button to enter a number between 1-4094 inclusive.
button to confirm this setting.
button.
navigation button to select a VLAN interface and press the
Merlin PLUS WNET Manual v2.0
button.
button.
button.
button.
button.
259
button.
button.
button.
button.