Tieline Merlin PLUS User Manual page 86

86 Merlin PLUS WNET Manual v2.0
·
Always dial the multicast server codec connection first before connecting multicast
client codecs.
·
Multicast client codecs will display return link quality (LQ) only. The Return reading
represents the audio being downloaded from the network locally.
·
It is not possible to connect to a G3 codec and receive multicast IP audio streams.
·
To copy multicast client programs onto multiple codecs see
Functions.
·
To learn more about programs see the section titled
·
Relay functionality is available for multicast connections between Tieline codecs.
·
See Toolbox web-GUI documentation for more detailed information about
configuring multicast client programs.
1. Press the HOME
and press the
2. Select Multicast Client to configure a client codec program.
3. Use the RETURN
KEYPAD to enter the multicast IP address you want to dial, using the
enter the periods in the IP address. The same multicast address and audio port must be used for
both the server and client programs. Next, press the down
and press
4. Press the down
5. Use the navigation buttons to select an algorithm profile, or manually select algorithm settings,
then press
button to return to the Home screen, select Connect > IP > Sessionless
button.
button to delete any numbers already entered, then use the numeric
.
navigation button to select Algorithm and press
.
Backup and Restore
About Program Dialing.
or
navigation button to select Setup
.
© Tieline Pty. Ltd. 2017
buttons to