Download Logs - Tieline Merlin PLUS User Manual

4. Click Save to store the new configuration.
MIB Files for SNMP Configuration
Management Information Base (MIB) files are required for SNMP applications to interact with your
Tieline codec and interpret SNMP data. The codec supports SNMPv1 and SNMPv2 MIB protocols.
The required MIB files can be downloaded from the codec using the following link in a PC web
browser connected to the same network as your codec:
·
http://<YOUR_CODEC_ADDRESS>/mibs/tieline-mibs.zip
Save the .zip file to your PC and import the contents into the MIB browser you use to manage
SNMP-enabled network devices.
Important Note: The codec supports the attributes specified in the MIB-II standard.
Please verify that your SNMP software contains the required files as specified in
1213.
23.27

Download Logs

The codec is capable of providing diagnostic information via user logs, which can either be sent to
Tieline support, or downloaded for user diagnostics.
Procedure for Sending Logs to Tieline
1. Open the HTML5 Toolbox Web-GUI and click Help in the Menu Bar, then click Resources.
2. Click Download Logs.
3. Save the file to your computer and then send the .zip file to Tieline support via
support@tieline.com
© Tieline Pty. Ltd. 2017
Merlin PLUS WNET Manual v2.0 235
RFC