Upgrading Firmware Via Usb - Tieline Merlin PLUS User Manual

Upgrading Firmware via USB

24.20
To download the latest codec firmware visit http://www.tieline.com/Support/Latest-Firmware. Copy
the firmware file onto a USB stick and then use the following procedure to perform a firmware
upgrade.
1. Insert a USB stick with the latest firmware into the USB port on the front panel of the codec.
2. Press the SETTINGS
3. Use the navigation buttons to select System and press the
4. Navigate down to Firmware update from a USB stick and press the
can take a few seconds for the USB stick to be detected.
5. Navigate to the firmware file after the USB stick has been detected, then press the
button.
6. After the upgrade is complete, remove the USB stick and press the
codec.
Important Note: We recommend clearing your browser cache after the upgrade is
complete when using the HTML5 Toolbox web-browser GUI to control codec functions.
The short cuts for this are:
© Tieline Pty. Ltd. 2017
button.
·
Google Chrome: shift+Ctrl+delete
·
Mozilla Firefox: Ctrl+shift+delete
·
Internet Explorer: Ctrl+shift+delete
·
Safari: Ctrl+alt+e
Merlin PLUS WNET Manual v2.0
button.
297
button. Note: it
button to reboot the