Tieline Merlin PLUS User Manual page 60

60 Merlin PLUS WNET Manual v2.0
4. Select Disable to disable the interface before editing settings.
5. Select Edit and then press
6. Navigate to each field in turn and press the
Select
7. Answer Route
calls using this SIP interface to a specific audio stream. The route setting in this menu
must correspond with the answering route configured in an audio stream within the
loaded program
first-come-first-served basis in a multi-stream program.
8. The SIP interface Wizard can also be used to enter SIP account information. Select Wizard to
navigate through each screen in turn automatically.
9. After completing configuration, navigate to Enable in the Modify SIP Interface menu and press
the button to enable the interface so that it can be used to make a SIP call.
to individually select and configure SIP interface settings.
and use the Change Interface Answer Route screen to route
. If the default value 0 is used then a call will be routed to an audio stream on a
button to edit SIP interface settings as required.
© Tieline Pty. Ltd. 2017