Tieline Merlin PLUS User Manual page 261

may be an Ethernet port and for another it may be a Wi-Fi interface. This allows you to
configure site-specific settings to suit available network interfaces at different remote locations.
1. Press the SETTINGS
2. Use the navigation buttons to select System and press the
3. Navigate to IP Via Setup and press the
4. Navigate to the Primary, Secondary or Tertiary IP Via interface setting and press the
5. Select an alternative default interface and press the
6. Press the Return button
Important Note: Fuse-IP cannot be configured as a default Primary, Secondary or
Tertiary Via.
© Tieline Pty. Ltd. 2017
button.
in the Warning dialog and press the
Merlin PLUS WNET Manual v2.0
button.
button.
to navigate back out of the menu, then navigate to Yes
button to save all changes.
button.
button.
261