Tieline Merlin PLUS User Manual page 166

166 Merlin PLUS WNET Manual v2.0
Deterministic
Line Hunt
Important Note: The G3 profile setting supports maintaining specific G3 codec settings
when answering a call from a G5 codec.
1. Auto: The codec will dial the G3 codec and connect in mono or stereo. This is
2. Dual Program: This allows the codec to dial a G3 codec with a Dual Program
3. Runtime: The G3 codec will retain runtime settings when answering a call from a
4. Custom: The G3 codec will load a specified profile, e.g. profile 6, which is the first
4. This audio stream connection in the wizard will allow the codec to dial. Enter the connection
name in the text box, then click Next.
5. Follow the instructions on the right-hand side of the panel to configure the transport settings for
the connection, then click Next.
Important Note: See
and see
6. Configure destination codec dialing and encoding settings:
For IP connections configure the IP address, ports, and then specify which streaming
interface is used to dial this connection, e.g. Primary (port ETH1) or Secondary (port
ETH2). Note: By default Any will select ETH1 if it is available and ETH2 if it is unavailable.
Select a Dial Route or Answer Route to configure deterministic routing
of multiple audio streams using transports like ISDN or POTS. Use of
Dial and Answer Routes is not necessary over IP. See
Answering or
Create line hunt groups for multiple incoming callers on a first come, first
served basis. This is ideal for separating groups of inputs and outputs
between different studios or stations. See
more information.
overridden in a Merlin or Merlin PLUS codec when a G3 Main + IFB use-case is
configured.
profile loaded and support two simultaneous mono connections.
G5 codec.
custom profile number.
RS232 Data Configuration
Enabling Relays and RS232 Data
Configuring POTS Answering
for detailed information on RS232 data
for more information on relay operations.
Configuring ISDN
for more information.
Line Hunt Call Answering
© Tieline Pty. Ltd. 2017
for