Tieline Merlin PLUS User Manual page 69

3. Use the RETURN
KEYPAD to enter the IP address of the codec you want to dial, using the
enter the periods in the IP address (or use the Virtual Keyboard). Next, press the down
navigation button to select Setup and press
Important Note: The codec remembers recent IP addresses just like a cell-phone. To
view these addresses just press
recent addresses and programs are listed first and you can use the navigation buttons to
scroll up and down. Press
4. Navigate to Algorithm and press
5. Use the navigation buttons to select an algorithm profile or manually enter algorithm settings,
then press
6. If you decide to manually program the algorithm, use the navigation buttons to select your
preferred algorithm sample rate (if displayed) and bit rate, pressing
selected.
7. Press the down
automatic jitter buffer setting for your connection, or to enter a fixed buffer setting in
milliseconds (maximum 5000 ms). The default Auto, Best Compromise setting is a good
starting point for most internet connections.
© Tieline Pty. Ltd. 2017
button to delete any numbers if already entered, then use the numeric
to select the address you have highlighted.
.
navigation button to select Jitter Buffer and press
Merlin PLUS WNET Manual v2.0
.
when you select the Connect IP screen. The most
.
69
or buttons to
after each option is
to select a different