Configure Mono Or Stereo Peer-To-Peer Programs In Merlin - Tieline Merlin PLUS User Manual

Renaming Inputs
1. Click the Input Settings
2. Click in the Name text box to enter a new name, or edit an existing name.
3. Click Save to confirm the name change.
Important Note: When the auxiliary input (AUX IN) is On the default mixer configuration
sends audio to all inputs. If you are not using the auxiliary input ensure it is Off to avoid
additional noise in program audio.
23.8

Configure Mono or Stereo Peer-to-Peer Programs in Merlin

The Program Manager panel incorporates a wizard to configure a new program and all audio
stream settings. Before you configure a new codec program consider if:
·
You want your codec to be capable of dialing and answering, dialing only or answering only.
·
A backup connection is required.
This section contains instructions for:
1. Configuring Merlin Peer-to-Peer Programs: Dialing
2. Configuring a Merlin Backup Connection or Auto Reconnect
3. Configuring Merlin to Answer Connections
For more information about programs and audio streams within programs see the section titled
About Program
© Tieline Pty. Ltd. 2017
symbol on the input you want to rename.
Dialing. Note: The following display how to configure a dial and answer program,
Merlin PLUS WNET Manual v2.0 147