Tieline Merlin PLUS User Manual page 41

Navigate to the source you want to monitor and press
1. Default: the default factory program headphone mix
2. Audio Stream: monitors the selected codec audio stream.
3. Inputs: monitors the codec inputs (i.e. encoders).
The default headphone mixes for factory programs are displayed in the following table.
1 x Peer-to-Peer Mono
1 x Peer-to-Peer Stereo
2 x Mono Peer-to-Peer
6 x Mono Peer-to-Peer
1 x Mono Peer-to-Peer + IFB
1 x Stereo Peer-to-Peer +
IFB
2 x Mono Peer-to-Peer + IFB
2 x Stereo Peer-to-Peer +
IFB
Adjust Auxiliary Output Settings
Settings for the auxiliary output audio are adjusted similarly to the HEADPHONE output, except that
the output level is fixed at line level. Configure the front panel HEADPHONE output and rear panel
HP/AUX output as an Aux Out and then:
1. Press the HEADPHONE
2. Use the left
3. Press RETURN
Note: Send/Return balance can also be adjusted by pressing the SETTINGS
to Audio and then Aux Bal and press
© Tieline Pty. Ltd. 2017
Codec Programs
button to display the aux output adjustment screen.
or right navigation buttons to adjust the Send/Return audio balance.
when you have finished to exit the menu.
Merlin PLUS WNET Manual v2.0
. Options include:
Left
Inputs 1&2/ Outputs 1&2
Input1 /Output 1
Input 1/Output 1
Input1 /Output 1
Inputs 1&2/ Outputs 1&2
Inputs 1&2/ Outputs 1&2
Inputs 1&2/ Outputs 1&2
Inputs 1&2/ Outputs 1&2
.
41
Right
Inputs 1&2/ Outputs 1&2
Input 2/Output 2
Input 2/Output 2
Input 2/Output 2
Aux In/Aux Out/
Input3/Output3
Aux In/Aux Out/
Input3/Output3
Input 5/Output 5
Input 5/Output 5
button, navigate