Tieline Merlin PLUS User Manual page 154

154 Merlin PLUS WNET Manual v2.0
Select POTS Codec in the Mode drop-down menu to encode/decode using POTS, or
select Analog Phone to configure a standard analog phone call, then click Next.
Next, enter the phone number of the codec or device you want to dial. When multiple
POTS modules are installed, click the Via drop-down menu and select Module 1 or
Module 2 to specify which POTS module will dial. Next, click Save Program to save
the program with default settings, or click Next to specify algorithm settings and
configure a backup connection if required (recommended).
Dialing settings for this POTS audio stream are now complete.
© Tieline Pty. Ltd. 2017