Configuring Ip Settings - Tieline Merlin PLUS User Manual
With wheatnet-ip ip / isdn / pots codec
Hide thumbs
Also See for Merlin PLUS:
- User manual (329 pages) ,
- Quick start manual (23 pages) ,
- User manual (188 pages)
Table of Contents
Advertisement
When connecting with a stereo program, the codec displays audio on PPM1 and 2 for inputs 1
and 2 and PPM 3 and 4 for the return audio.
23.2
Configuring IP Settings
Open the HTML5 Toolbox Web-GUI and click Settings and then click Network to view and
configure Ethernet and VLAN interface settings in the Web-GUI.
Important Note: For assistance with configuration of IPv4 or IPv6 network connections
contact your IT Administrator.
IPv4 versus IPv6
An IP address is a unique address to identify a device on a TCP/IP network. Your codec uses dual
IP protocol stacks to allow your codec to work on both IPv4 and IPv6 networks. Tieline codecs
support both DHCP (default) IP addressing and static IP addresses for dialing IPv4 connection
endpoints.
© Tieline Pty. Ltd. 2017
Merlin PLUS WNET Manual v2.0
121
Advertisement
Table of Contents
Need help?
Do you have a question about the Merlin PLUS and is the answer not in the manual?