Tieline Merlin PLUS User Manual page 134

134 Merlin PLUS WNET Manual v2.0
It is possible to save up to four different ISDN Answer Configs, which allow up to 4 ISDN B
channels to be individually configured for unique answering behaviors. ISDN answering can be
configured to suit:
·
Hardware available in the codec, i.e. the number of B channels available.
·
Expected dialing behaviors, e.g. if B channels should bond or not, and whether audio streams
need to use Dial and Answer Route tags.
·
The type of call being received by the codec, e.g. Tieline (with Tieline Session Data) versus
non-Tieline sessionless calls.
·
The algorithm expected when receiving sessionless calls.
Each of the four available Configs allows you to select which B channel or channels are used to
answer a call or calls from incoming ISDN codecs. Up to 4 B channels can be selected if 2 ISDN
modules are installed in the codec.
To reset ISDN answering to default settings click the Options symbol in the top right-hand corner
of the panel and select Reset all to factory defaults.
Important Note: B channels can only be selected once and a Summary of allocated B
channels is displayed on the left-hand side of the ISDN Answer panel.
© Tieline Pty. Ltd. 2017