Creating A Multicast Client Program - Tieline Merlin PLUS User Manual

4. Navigate to a registered SIP account and press
5. The SIP Account is now selected and the codec will attempt to establish the connection via
a SIP server.
Important Notes:
·
See
codec.
·
If you don't save the program during configuration, a temporary program is created after
you dial the SIP connection for the first time using the codec KEYPAD. The temporary
program will appear in the recent calls list if you want to redial the program.
It is also possible to configure SIP programs using the Toolbox web-GUI.
21.14

Creating a Multicast Client Program

Two different types of multicast programs need to be created when multicasting:
·
A multicast server program is used by the broadcasting codec to send multicast IP packets
to multicast routers on a network.
·
A multicast client program is used by codecs to receive multicast IP audio packets.
Important Notes:
© Tieline Pty. Ltd. 2017
Configuring SIP Accounts
·
You cannot edit a program when it is currently loaded in the codec.
·
Ensure all connection related settings like the port, algorithm, bit rate (etc) match
on both multicast server and client programs or they will not be able to join
multicast streaming sessions.
·
The default UDP audio port is 9000 for a multicast client program configured via the
codec front panel.
·
You can lock a loaded custom program
program cannot be unloaded by a codec dialing in with a different program type.
Merlin PLUS WNET Manual v2.0
.
for instructions on entering SIP account details into the
in a codec to ensure the currently loaded
85