Tieline Merlin PLUS User Manual page 70

70 Merlin PLUS WNET Manual v2.0
8. Press the down
view selection options. Use the navigation buttons to select the FEC percentage you want to
use and press
9. When configuration is complete press the RETURN
Connect IP screen that the IP address was entered into.
Important Note: At this point you can navigate to Save on the Connect IP screen and
press
program.
10. Press the CONNECT
appears during the connection process.
11. Alternatively, to load a saved program and dial press the HOME
Programs, select the program you want to dial and press the CONNECT
the program and dial.
12. When dialing, the CONNECTED LED on the front of the unit will flash green. When connected,
the CONNECTED LED on the front of the unit will illuminate solid green.
13. From the Home screen use the down
connection Status and press
connection. To negotiate higher bit rates press
bit rates press
navigation button to select FEC (forward error correction) and press
.
to use the numeric KEYPAD to name the program and press
button to make a connection. The Wait Connecting screen
to view connection statistics for IP packets being sent over the
then 9.
button to navigate backwards to the
navigation button to select Cxns and view
then 3 on the numeric KEYPAD; for lower
to
to save the
button, navigate to
button to load
© Tieline Pty. Ltd. 2017