Tieline Genie STL Quick Start Manual

Ip codec

Hide thumbs Also See for Genie STL:

Genie STL and Merlin

IP Codec Quick Start Guide

Software Version: 2.2.2

Manual Version: 1.0

October, 2012

Table of Contents

Need help?

Do you have a question about the Genie STL and is the answer not in the manual?

Page 1 Genie STL and Merlin IP Codec Quick Start Guide Software Version: 2.2.2 Manual Version: 1.0 October, 2012...
Page 2 PERMANENT DAMAGE MAY OCCUR! If you are unfamiliar with any facility, check that the line you are using is NOT a digital line. If the Tieline codec becomes faulty due to the use of a digital phone system, the WARRANTY WILL BE VOID.
Page 3 IP for the very first time without using the Toolbox web-GUI and your computer for configuration. For more detailed information about configuring your codec and managing audio stream connections, download the latest user manual for your codec. © Tieline Pty. Ltd. 2012...
Page 4 5. Use the navigation buttons to select an algorithm profile or manually enter algorithm settings, then press If you decide to manually program the algorithm, use the navigation buttons to select your preferred algorithm sample rate (if displayed) and bit rate, pressing after each option is selected. © Tieline Pty. Ltd. 2012...
Page 5 User Manuals and Latest Firmware To download the latest firmware for your codec and view software release notes visit www.tieline.com/Support/Latest-Firmware To download the latest user manual for your codec visit www.tieline.com/Support/Documentation/ User-Manuals © Tieline Pty. Ltd. 2012...

Merlin