Finding Feature Information - Cisco Catalyst 2960 series Configuration Manual

MAC Authentication Bypass
The MAC Authentication Bypass feature is a MAC-address-based authentication mechanism that allows
clients in a network to integrate with the Cisco Identity Based Networking Services (IBNS) and Network
Admission Control (NAC) strategy using the client MAC address. The MAC Authentication Bypass feature
is applicable to the following network environments:
• Network environments in which a supplicant code is not available for a given client platform.
• Network environments in which the end client configuration is not under administrative control, that
•
•
•
•
•
•
•

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest caveats and
feature information, see Bug Search Tool and the release notes for your platform and software release. To
find information about the features documented in this module, and to see a list of the releases in which each
feature is supported, see the feature information table at the end of this module.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.
is, the IEEE 802.1X requests are not supported on these networks.
Finding Feature Information, page 1041
Prerequisites for Configuring MAC Authentication Bypass, page 1042
Information About MAC Authentication Bypass, page 1042
How to Configure MAC Authentication Bypass, page 1044
Configuration Examples for MAC Authentication Bypass, page 1050
Additional References for MAC Authentication Bypass, page 1050
Feature Information for MAC Authentication Bypass, page 1051
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
42
C H A P T E R
1041