Monitoring And Maintaining Secure Shell Version 2 - Cisco Catalyst 2960 series Configuration Manual

Examples
The following sample output from the show ip ssh command displays the version of SSH that is enabled, the
authentication timeout values, and the number of authentication retries for Version 1 and Version 2 connections:
-----------------------------------------------------------------------
Device# show ip ssh
SSH Enabled - version 1.99
Authentication timeout: 120 secs; Authentication retries: 3
-----------------------------------------------------------------------
The following sample output from the show ip ssh command displays the version of SSH that is enabled, the
authentication timeout values, and the number of authentication retries for a Version 2 connection with no
Version 1 connection:
------------------------------------------------------------------------
Device# show ip ssh
SSH Enabled - version 2.0
Authentication timeout: 120 secs; Authentication retries: 3
------------------------------------------------------------------------
The following sample output from the show ip ssh command displays the version of SSH that is enabled, the
authentication timeout values, and the number of authentication retries for a Version 1 connection with no
Version 2 connection:
------------------------------------------------------------------------
Device# show ip ssh
3d06h: %SYS-5-CONFIG_I: Configured from console by console
SSH Enabled - version 1.5
Authentication timeout: 120 secs; Authentication retries: 3
------------------------------------------------------------------------

Monitoring and Maintaining Secure Shell Version 2

SUMMARY STEPS
1. enable
2. debug ip ssh
3. debug snmp packet
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Configure Secure Shell Version 2 Support
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
1105