Enabling Configurable Mab Username And Password - Cisco Catalyst 2960 series Configuration Manual

Enabling Configurable MAB Username and Password

SUMMARY STEPS
1. enable
2. configure terminal
3. mab request format attribute 1 groupsize {1 | 2 | 4 | 12} separator {- | : | .} [lowercase | uppercase]
4. mab request format attribute 2 [0 | 7] password
5. end
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2 configure terminal
Example:
Device# configure terminal
Step 3 mab request format attribute 1 groupsize {1 | 2 | 4 | 12}
separator {- | : | .} [lowercase | uppercase]
Example:
Device(config)# mab request format attribute 1
groupsize 2 separator :
Step 4 mab request format attribute 2 [0 | 7] password
Example:
Device(config)# mab request format attribute 2
password1
Step 5 end
Example:
Device(config)# end
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Configure MAC Authentication Bypass
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Configures the username format for MAB
requests.
Configures a global password for all MAB
requests.
Returns to privileged EXEC mode.
1049