Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual

Feature Information for Secure Shell Version 2 Support
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Table 109: Feature Information for Secure Shell Version 2 Support
Feature Name
Secure Shell Version 2 Client and
Server Support
Secure Shell Version 2
Enhancements
Secure Shell Version 2
Enhancements for RSA Keys

Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)

1114
Releases Feature Information
Cisco IOS XE Release The Cisco image was updated to provide
3.4SG for the automatic generation of SNMP traps
when an SSH session terminates.
This feature was supported on CAT2960,
CAT3560E, CAT3560X, CAT3750,
CAT3750E, CAT3750X, CAT4500.
Cisco IOS XE Release The Secure Shell Version 2 Enhancements
3.4SG feature includes a number of additional
capabilities such as support for VRF-Aware
SSH, SSH debug enhancements, and DH
Group 14 and Group 16 exchange support.
This feature was supported on CAT2960,
CAT3560E, CAT3560X, CAT3750,
CAT3750E, CAT3750X, CAT4500.
Note
The following commands were introduced
or modified: debug ip ssh, and ip ssh dh
min size.
Cisco IOS XE Release The Secure Shell Version 2 Enhancements
3.4SG for RSA Keys feature includes a number of
additional capabilities to support RSA
key-based user authentication for SSH and
SSH server host key storage and
verification.
This feature was supported on CAT2960,
CAT3560E, CAT3560X, CAT3750,
CAT3750E, CAT3750X, CAT4500.
The VRF-Aware SSH feature is
supported depending on your
release.