Configuring Application Visibility And Control In A Wired Network; Finding Feature Information; Information About Application Visibility And Control In A Wired Network - Cisco Catalyst 9500 Manual

Configuring Application Visibility and Control in
a Wired Network
•
•
•
•
•
•
•
•
•
•

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest caveats and
feature information, see Bug Search Tool and the release notes for your platform and software release. To
find information about the features documented in this module, and to see a list of the releases in which each
feature is supported, see the feature information table at the end of this module.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.
Information About Application Visibility and Control in a Wired
Network
Note This feature is not supported on the C9500-32C, C9500-32QC, C9500-48Y4C, and C9500-24Y4C models
of the Cisco Catalyst 9500 Series Switches.
Finding Feature Information, on page 107
Information About Application Visibility and Control in a Wired Network, on page 107
Supported AVC Class Map and Policy Map Formats, on page 108
Restrictions for Wired Application Visibility and Control, on page 109
How to Configure Application Visibility and Control, on page 111
Monitoring Application Visibility and Control, on page 131
Examples: Application Visibility and Control Configuration, on page 131
Basic Troubleshooting - Questions and Answers, on page 143
Additional References for Application Visibility and Control, on page 144
Feature History for Application Visibility and Control in a Wired Network, on page 144
System Management Configuration Guide, Cisco IOS XE Fuji 16.8.x (Catalyst 9500 Switches)
5
C H A P T E R
107