Configuring Location Tlv And Wired Location Service - Cisco Catalyst 2975 Software Configuration Manual

Configuring LLDP, LLDP-MED, and Wired Location Service
This example shows how to configure VLAN 100 for voice application with CoS and to enable the
network-policy profile and network-policy TLV on an interface:
Switch# configure terminal
Switch(config)# network-policy 1
Switch(config-network-policy)# voice vlan 100 cos 4
Switch(config-network-policy)# exit
Switch(config)# interface gigabitethernet1/0/1
Switch(config-if)# network-policy profile 1
Switch(config-if)# lldp med-tlv-select network-policy
This example shows how to configure the voice application type for the native VLAN with priority
tagging:
Switch(config-network-policy)# voice vlan dot1p cos 4
Switch(config-network-policy)# voice vlan dot1p dscp 34

Configuring Location TLV and Wired Location Service

Beginning in privileged EXEC mode, follow these steps to configure location information for an
endpoint and to apply it to an interface.
Command
Step 1 configure terminal
Step 2
location {admin-tag string | civic-location
identifier id | elin-location string identifier
id}
Step 3 exit
Step 4 interface interface-id
Step 5 location {additional-location-information
word | civic-location-id id | elin-location-id
id}
Step 6 end
Catalyst 2975 Switch Software Configuration Guide
25-10
Chapter 25 Configuring LLDP, LLDP-MED, and Wired Location Service
Purpose
Enter global configuration mode.
Specify the location information for an endpoint.
admin-tag—Specify an administrative tag or site information.
•
civic-location—Specify civic location information.
•
elin-location—Specify emergency location information (ELIN).
•
identifier id—Specify the ID for the civic location.
•
string—Specify the site or location information in alphanumeric
•
format.
Return to global configuration mode.
Specify the interface on which you are configuring the location
information, and enter interface configuration mode.
Enter location information for an interface:
additional-location-information—Specify additional information
for a location or place.
civic-location-id—Specify global civic location information for an
interface.
elin-location-id—Specify emergency location information for an
interface.
id—Specify the ID for the civic location or the ELIN location. The ID
range is 1 to 4095.
word—Specify a word or phrase with additional location
information.
Return to privileged EXEC mode.
OL-19720-02