Configuring The Global Ldap Timeout Interval - Cisco Nexus 9000 Series Configuration Manual

Configuring LDAP
Command or Action
Step 10 (Optional) copy running-config startup-config
Example:
switch(config)# copy running-config startup-config
Related Topics

Configuring the Global LDAP Timeout Interval

You can set a global timeout interval that determines how long the Cisco NX-OS device waits for responses
from all LDAP servers before declaring a timeout failure.
Before you begin
Enable LDAP.
SUMMARY STEPS
1. configure terminal
2. [no] ldap-server timeout seconds
3. (Optional) show ldap-server
4. (Optional) copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2 [no] ldap-server timeout seconds
Example:
switch(config)# ldap-server timeout 10
Step 3 (Optional) show ldap-server
Example:
switch(config)# show ldap-server
Step 4 (Optional) copy running-config startup-config
Example:
switch(config)# copy running-config startup-config
LDAP Server Configuration
Configuring LDAP Server Hosts, on page 111
Enabling or Disabling LDAP, on page 110
Configuring LDAP Server Hosts, on page 111
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
Purpose
Copies the running configuration to the startup
configuration.
Process, on page 109
Purpose
Enters global configuration mode.
Specifies the timeout interval for LDAP servers. The default
timeout interval is 5 seconds. The range is from 1 to 60
seconds.
Displays the LDAP server configuration.
Copies the running configuration to the startup
configuration.
Configuring the Global LDAP Timeout Interval
115