Yamaha RIVAGE PM10 Operation Manual page 90

Basic Operations  Pairing
Pairing
You can pair adjacent channels for stereo operation.
■ Input channels
You can pair either odd/even-numbered channels or even/odd-numbered channels. For single input
channels (monaural), the pan level is nominal at the center, and +3 dB at hard left or hard right. For
paired input channels, the balance level is nominal at the center, and +3 dB at hard left or hard right.
■ MIX buses and MATRIX buses
You can pair adjacent odd/even-numbered MIX buses or MATRIX buses.
NOTE
For information on the parameters that can be linked using the pair setting, refer to the data list.
Setting or defeating pairing on the panel
1.
For the two adjacent channels, hold down the [SEL] key of one, and press the
[SEL] key of the other.
The sequence of the two [SEL] keys will determine which channel parameters will be copied to
the other channel. When you pair channels, the parameters of the channel you pressed first
will be copied to the subsequently-pressed channel. For example, if you want to pair channel 1
and channel 2, press and hold down the channel 1 [SEL] key, and then press the channel 2
[SEL] key. The channel 1 parameter status will be copied to channel 2.
For information on the parameters that can be copied or linked by the pair setting, refer to the
data list.
2.
To defeat pairing, press and hold down the [SEL] keys of one of the paired
channels, and then press the [SEL] key of the other.
When MIX buses are paired, the signal flow will change as described below:
CH to MIX
FIX
to MIX(FIX)
POST ON
MONO to MONO
to MIX(FIX)
POST PAN L
MONO to STEREO
POST PAN R
to MIX(FIX)
POST ON
STEREO to MONO
POST ON
to MIX(FIX)
POST PAN L
STEREO to STEREO
POST PAN R
CH to MIX
VARI
PRE FILTER
to MIX / MATRIX (VARI )
PRE EQ
PRE DYN 1
MONO to MONO
PRE DYN 2
PRE FADER
POST FADER
POST ON
to MIX / MATRIX (VARI ) PRE FILTER
PRE EQ
PRE DYN 1
MONO to STEREO
PRE DYN 2
PRE FADER
POST FADER
POST ON
to MIX / MATRIX (VARI )
PRE FILTER
STEREO to MONO
PRE EQ
PRE DYN 1
PRE DYN 2
L CH
PRE FADER
POST FADER
POST ON
PRE FILTER
PRE EQ
PRE DYN 1
PRE DYN 2
R CH
PRE FADER
POST FADER
POST ON
to MIX / MATRIX (VARI )
PRE FILTER
STEREO to STEREO
PRE EQ
PRE DYN 1
PRE DYN 2
L CH
PRE FADER
POST FADER
POST ON
PRE FILTER
PRE EQ
PRE DYN 1
PRE DYN 2
R CH
PRE FADER
POST FADER
POST ON
90
CONTENTS FUNCTION MAP
ON
to MIX1
to MIX2-72
(same as above)
to MIX1
ON
to MIX2
to MIX3-72
(same as above)
to MIX1
ON
to MIX1
to MIX2-72
(same as above)
to MIX1
ON
to MIX2
to MIX3-72
(same as above)
LEVEL
ON
to MIX 1(MATRIX 1)
to MIX 2- 72(MATRIX 2- 36)
(same as above )
PAN to MIX 1(MATRIX 1)
LEVEL
ON
to MIX 2(MATRIX 2)
to MIX 3- 72(MATRIX 3- 36)
(same as above )
LEVEL
ON
to MIX 1(MATRIX 1)
to MIX 1(MATRIX 1)
to MIX 2- 72(MATRIX 2- 36)
(same as above )
LEVEL
ON
to MIX 1(MATRIX 1)
to MIX 2(MATRIX 2)
BALANCE
to MIX 3- 72(MATRIX 3- 36)
(same as above )
RIVAGE PM10 Operation Manual
MIX1-72
(MATRIX1-36)
1 2 71 72
MIX1- 72
(MATRIX 1- 36)
1 2 71 72