Yamaha RIVAGE PM10 Operation Manual page 88

Basic Operations  Using libraries
Recalling a preset from a library
1.
Press the LIBRARY tool button in the target screen to access the corresponding
library screen.
Each library screen contains the following items.
1
1
USER preset/FACTORY preset switching buttons
Switch between the user preset and factory preset display.
NOTE
The FACTORY preset switching button appears only on library screens for plug-ins that feature
factory presets.
2 List
Displays the setting data (presets) stored in the library.
The highlighted row in the list indicates that the item is selected for use.
NOTE
The right column in the list shows information related to the corresponding setting data (such as
the type of output channels, Dynamics or effect type used).
3 RECALL button
Recalls a preset for the currently-selected item.
2
3
2.
Rotate the corresponding screen encoder to select the preset number you want
to recall.
3.
Press the RECALL button.
The selected preset data will be loaded and displayed.
NOTE
Some presets selected as the recall source may not be recalled into the currently-selected item.
The following restrictions apply for each library:
• Channel libraries
In the OUTPUT CH library, if the type of channel selected in the list does not match the
type of channel selected as the recall destination, the "CONFLICT" indicator will appear on
the right side of the TYPE column. You can still recall the preset while the "CONFLICT"
indicator appears. However, please note that parameters that are not included in the recalled
preset will be set to default values.
• OUTPUT EQ library
This library is sub-categorized into three types: output channel EQ, 8BandPEQ (to be
mounted to INSERT), and MONITOR/CUE EQ. If you select a different type of preset than
the destination, the "CONFLICT" indicator will appear. You can still recall the preset while
the "CONFLICT" indicator appears. However, please note that parameters that are not
included in the recalled preset will be set to default values or will remain unchanged.
• GEQ library
The presets stored in the GEQ library are sub-categorized into two types: 31BandGEQ and
Flex15GEQ. If a 31BandGEQ library preset includes gain settings for more than 15 bands,
you will be unable to recall it into Flex15GEQ.
• USER SETUP library
Setup data created in PM10 Editor can be recalled only by using PM10 Editor. Setup data
created on the control surface can be recalled only by using the control surface.
88
CONTENTS FUNCTION MAP
RIVAGE PM10 Operation Manual