Yamaha RIVAGE PM10 Operation Manual page 337

MIDI/GPI  Using Program Changes to recall scenes
5.
Select the channel.
To select an item, use the [TOUCH AND TURN] knob. Press the OK button to confirm the
selected channel and close the MIDI SETUP popup window.
NOTE
Alternatively, you can select the desired channel by pressing the channel entry in the field or by
turning the corresponding screen encoder.
6.
Turn transmission/reception on or off for each MIDI message.
NOTE
• For details on using Program Changes, refer to
below.
• For details on using Control Changes, refer to
(page 340).
"Using Program Changes to recall scenes"
"Using Control Changes to control parameters"
Using Program Changes to recall scenes
The RIVAGE PM10 system enables you assign a specific scene to be recalled to each Program
Change number, so that when a scene is recalled on the RIVAGE PM10 system, a Program Change
message of the corresponding number will be transmitted to an external device. Conversely, the
corresponding scene can be recalled when a Program Change message is received from an external
device.
1.
Connect the control surface to an external device.
MIDI IN MIDI OUT
2.
As described in "Basic MIDI
will be used to transmit/receive Program Changes.
3.
Press the PROGRAM CHANGE tab.
The screen contains the following items.
337
CONTENTS FUNCTION MAP
MIDI IN
External device
Settings" (page 335), select the MIDI channels that
RIVAGE PM10 Operation Manual
MIDI OUT