Yamaha RIVAGE PM10 Operation Manual page 261

Plug-ins  Controlling the parameters of a plug-in
5 CROSSOVER ZONE
This band-color area changes according to the CROSSOVER parameter value for the
corresponding band.
6 CROSSOVER RANGE
This band-color horizontal bar graph indicates a variable range of the CROSSOVER parameter
value for the corresponding band.
7
CROSSOVER BAND WIDTH
This band-color horizontal bar graph changes according to the CROSSOVER parameter value
for the corresponding band.
8 INPUT meter
Shows the level of the input signal.
One meter is shown in the case of DUAL, and two meters in the case of STEREO.
9 OUTPUT meter
Shows the level of the output signal.
One meter is shown in the case of DUAL, and two meters in the case of STEREO.
1
2
3
4
5
6
1
GAIN
Adjusts the output gain for the corresponding band.
2
THRESHOLD
Adjusts the level at which the compressor begins to apply for the corresponding band.
The value will be also indicated by a red marker on the
3 RATIO
Adjusts the compression ratio for the corresponding band.
4 ATTACK
Adjusts the attack time at which the compressor begins to apply for the corresponding band.
5 RELEASE
Adjusts the release time of the compressor for the corresponding band.
261
CONTENTS FUNCTION MAP
7
8
9
)
!
#
@
$
)
INPUT meter.
RIVAGE PM10 Operation Manual