You can store and load all data of the RIVAGE PM10 system to and from a USB flash drive
connected to the USB port on the control surface.
• You cannot use the RECORDING connector (a USB port dedicated for recording) for save and load
• The system will recognize only one USB flash drive that is connected to one of the USB ports. Do
not connect multiple USB flash drives.
• The operation of USB 2.0 or 3.0 flash drives only is guaranteed.
• The operation of USB flash drives with capacities of up to 32GB has been verified. (However, this
does not necessarily guarantee the operation of all USB flash drives.) The FAT16 and FAT32 formats
"ACCESS" will appear on the status indicator while data is being accessed (i.e., saved, loaded, or
deleted). During this time, do not remove the USB flash drive or power-off the control surface. Doing so
may damage the data on the storage media.
Saving the RIVAGE PM10 system's settings on a
USB flash drive
All internal data of the RIVAGE PM10 system can be saved to the USB flash drive in a single
operation as a settings file. If you save a file by selecting the ALL tab, the saved file will have an
extension of ".PM10ALL". Otherwise, all other saved files will have an extension of ".PM10PART".
Press the SETUP button on the menu bar to access the SETUP screen.
Press the SAVE/LOAD button to access the SAVE/LOAD popup window.
RIVAGE PM10 Operation Manual