Yamaha RIVAGE PM10 Operation Manual page 341

MIDI/GPI  Using Control Changes to control parameters
MIDI/GPI window (CONTROL CHANGE page)
1
3
1 CONTROL CHANGE field
Enables you to switch Control Change transmission/reception on or off, and specify whether
Control Changes will be echoed out. This setting is linked with the CONTROL CHANGE field
on the MIDI page.
2 List
Shows the fader/knob operation or [ON] key on/off operation that are assigned to each control
number.
• NO...................................Indicates the Control number. You can use control numbers 1–31,
33–95, and 102–119.
• CONTROL CHANGE ASSIGNMENT
...........................Enables you to view and select the type of parameter assigned to
each control number. When you press a parameter, the MIDI
CONTROL CHANGE popup window will appear, enabling you to
change the control number assignment.
3
Scroll knob
Press this knob to scroll the list upward or downward using the screen encoder.
4
CLEAR ALL button
Press this button to clear all parameter assignments on the list.
4.
Use the buttons in the CONTROL CHANGE field to turn transmission and
reception on or off, and make settings for echo output.
Each button has the following function.
• Tx button .......................Switches Control Change transmission on or off.
• Rx button .......................Switches Control Change reception on or off.
• ECHO button................Selects whether incoming Control Changes will be echoed out from
5.
To change the operation assignment for each control number, press the
corresponding parameter.
2
The MIDI CONTROL CHANGE popup window will appear. In this window, you can specify
the parameter assigned to each control number. The screen contains the following items.
4
1
1
MODE field
Enables you to select an operation target that will be controlled via a Control Change message,
from input channels, output channels, DCAs, and Mute Master.
2 PARAMETER 1/2/3 fields
In conjunction with the MODE field, this field specifies the type of operation parameter.
NOTE
For details on the operations that can be assigned to Control Changes, refer to the data list.
341
CONTENTS FUNCTION MAP
the MIDI transmit port.
2
RIVAGE PM10 Operation Manual