Yamaha RIVAGE PM10 Operation Manual page 263

Plug-ins  Using the Tap Tempo function
6 REPRODUCE: DECK TYPE
Selects the reproduction deck type.
7 REPRODUCE: LEVEL knob
Adjusts the output level of the reproduction deck.
8
REPRODUCE: ADJUST HIGH knob
Adjusts the high range gain of the reproduction deck.
9
REPRODUCE: ADJUST LOW knob
Adjusts the low range gain of the reproduction deck.
)
VU ADJUST switch
When you turn this button on, the VU ADJUST knob, instead of the VU meter for Channel 2,
appears inthe meter section. If you turn this button off, the VU meter for Channel 2 appears.
VU ADJUST knob
Specifies the level assigned to 0VU on the VU meter.
This knob will appear only if the VU ADJUST button is turned on.
! SPEED switch
Selects the tape speed.
@ TAPE KIND switch
Selects the tape type.
# RECORD/REPRO switch
Enables you to select RECORD (input to the recording deck) or REPRO (output from the
reproduction deck) as the signals to be monitored via the level and VU meters.
$
Level meter
Shows the effect level of the monitoring signals selected via the RECORD/REPRO switch.
%
VU meters
The VU meters of the deck selected via the RECORD/REPRO switch are displayed here.
The number of VU meters varies depending on the status of the VU ADJUST button.
If the VU ADJUST button is turned on, the meter for one channel will be displayed. If the VU
ADJUST button is turned off, the meters for two channels will be displayed.
Using the Tap Tempo function
"Tap tempo" is a function that lets you specify the delay time of a delay effect or the modulation
speed of a modulation effect by striking a key at the desired interval.
To use the Tap function, you must first assign Tap Tempo to a USER DEFINED key, and then
operate that USER DEFINED key (page
1.
Assign one of TAP TEMPO 1–4 to a USER DEFINED key.
263
CONTENTS FUNCTION MAP
329).
RIVAGE PM10 Operation Manual