Yamaha RIVAGE PM10 Operation Manual page 184

CH Parameter  INSERT/D.OUT (Insert/Direct Out)
Directly outputting an input channel
The signal of an input channel can be directly output from the OUTPUT jack of an I/O device, any
desired OMNI OUT jack, or an output channel of a desired card slot.
1.
In the OVERVIEW screen of the input channel that you want to directly output,
press the INSERT/DIRECT OUT field, or press the DIRECT OUT field in the
SELECTED CHANNEL VIEW screen. The INSERT/D.OUT popup window appears.
INSERT/DIRECT OUT field in the
OVERVIEW screen
There are two types of INSERT/D.OUT popup window: 1CH and 12CH D. OUT. Each screen
contains the following items.
DIRECT OUT field in the
SELECTED CHANNEL VIEW screen
INSERT/D.OUT popup window (1CH)
1 2 3
1
DIRECT OUT point
Enables you to select the signal extraction point as PRE FILTER, PRE EQ, PRE DYN1, PRE
DYN2, PRE FADER, POST FADER, or POST ON.
2 DIRECT OUT LEVEL knob
Indicates the output level of the Direct Out. You can press this knob, and then use the screen
encoder or the [TOUCH AND TURN] knob to adjust the level.
3
DIRECT OUT PATCH popup button
Indicates the currently-selected port. If nothing is selected, the button indicates ----. Press this
button to access the patch window.
4 DIRECT OUT ON button
Switches direct out on/off. The currently-specified Direct Out point is indicated in the lower
part of the button.
184
CONTENTS FUNCTION MAP
RIVAGE PM10 Operation Manual
4