Yamaha RIVAGE PM10 Operation Manual page 63

Part Names & Functions  Top panel of the control surface
SCENE MEMORY section
1
4
3
6
7
1
[OVERLAY] key
Press this button to display the
OVERLAY SETTING screen.
While pressing and holding down the
[SHIFT] key, press the [OVERLAY] key
to switch Overlay on or off.
While Overlay is turned on, press and
hold down the [OVERLAY] key to
enter Overlay edit mode.
2 [UNDO] key
Cancels the most recent scene
operation of storing, recalling or
updating a scene.
After you cancel the operation by
pressing the [UNDO] key, you can
"redo" the canceled operation by
pressing the [UNDO] key again.
NOTE
You cannot undo an operation to store a
new scene.
3 [UPDATE] key
Updates scene data by overwriting the
current scene (that has been recalled or
2
stored most recently) with the current
mix data.
4 Scene memory display
5
Indicates the selected scene memory.
5 [PREVIEW] key
Switches Preview mode on or off.
8
(This feature will be supported by a
future update.)
6 [STORE] key
Stores the current mix data to the
selected scene memory.
7
[INC]/[DEC] keys
Enable you to select the scene number
of a scene that you want to store or
recall.
8 [RECALL] key
Enables you to recall a stored scene
from scene memory.
USER DEFINED KEYS/KNOBS section
1
2
3
4
5
63
CONTENTS FUNCTION MAP
1
USER DEFINED [A]/[B]/[C]/[D]
BANK keys
Select the bank ([A], [B], [C], or
[D]) for the USER DEFINED knobs
or USER DEFINED keys.
2 USER DEFINED KNOBS
displays
Indicate the functions assigned to
the USER DEFINED knobs.
3 USER DEFINED KNOBS
[1]/[2]/[3]/[4]
Control the functions as assigned by
the user.
4
USER DEFINED KEYS
displays
Indicate the functions assigned to
the USER DEFINED keys.
5 USER DEFINED KEYS [1]–[12]
Control the functions as assigned by
the user.
RIVAGE PM10 Operation Manual