Yamaha RIVAGE PM10 Operation Manual page 213

Channel Job  Copying and initializing channels
2.
Select the copy source channel.
Once you select the copy source channel, the system automatically engages a mode that
enables you to select the copy destination. The fader graphics for the copy source channel will
be highlighted in green.
3.
Select the copy destination channel(s) (multiple selections are allowed).
The fader graphics for the copy destination channel(s) will be highlighted in pink.
4.
To execute the copy operation, press the PASTE button.
The copy operation will be executed, and the parameter settings will overwrite those of the
copy destination(s).
5.
To close the CH COPY popup window, press the CLOSE button.
Initializing channel parameters
You can restore the parameters of a channel to an initialized state. This operation can be performed
on any channel(s).
NOTE
Analog HA, channel name, patch, and Recall Safe settings will not be initialized.
1.
Press the CH JOB button on the menu bar, and then select CH DEFAULT.
The CH DEFAULT popup window will appear.
213
CONTENTS FUNCTION MAP
RIVAGE PM10 Operation Manual