Yamaha RIVAGE PM10 Operation Manual page 61

Part Names & Functions  Top panel of the control surface
DCA/MUTE/INSERT
1
2
3 4
DYNAMICS
5
1 2 4
3
1
DCA ASSIGN LEDs
Indicate the assigned DCAs.
2
MUTE GROUP ASSIGN LEDs
Indicate the assigned Mute Groups.
3
INSERT [PLUG-INS] key
Enables you to recall a parameter setting screen for
the inserted plug-ins.
4 INSERT 1/2 [ON] keys
Switch the INSERT1 and INSERT2 on or off
respectively.
1 DYNAMICS 1/2 IN LED
6
Indicates the Dynamics input level.
2
DYNAMICS 1/2 GR LED
Indicates the amount of Dynamics
gain reduction.
3 DYNAMICS 1/2 [<]/[>] keys
Switch parameters that are indicated
on the DYNAMICS display.
4
DYNAMICS 1/2 setting knobs
Set parameters that are indicated on
the DYNAMICS display.
5 DYNAMICS 1/2 display
Indicates the Dynamics parameters.
6 DYNAMICS 1/2 [ON] key
Switches Dynamics on or off.
MIX/MATRIX SENDS
2
4
3
1
5
6
61
CONTENTS FUNCTION MAP
1 MIX/MATRIX knobs
Adjust the send levels for the corresponding buses.
2 MIX/MATRIX SENDS [PRE] keys
Toggle the send point between PRE and POST. If a key
lights up, the send point is set to PRE.
3
MIX/MATRIX SENDS [ON] keys
Switch the send signal to the corresponding bus on or off.
4
MIX/MATRIX SENDS display
Indicates the corresponding bus.
5
MIX/MATRIX SENDS [MIX]/[MATRIX] keys
Switch the type of the send destination bus.
6
MIX/MATRIX SENDS [1-12]/[13-24]/[25-36]/
[37-48]/[49-60]/[61-72] keys
Selects a bank for the send destination bus.
RIVAGE PM10 Operation Manual