Yamaha RIVAGE PM10 Operation Manual page 254

Plug-ins  Controlling the parameters of a plug-in
! LIMIT IN switch
Switches the limiter on/off.
@ LIMIT THRESHOLD knob
Adjusts the threshold of the limiter.
#
LIMIT RECOVERY knob
Selects the release time of the limiter. With the AUTO setting, the release time changes
automatically in the range of 50 ms to 5 sec.
$ LIMIT ATTACK switch
Switches the attack time of the limiter. FAST: 2ms, SLOW: 3ms
■ Rupert Comp 830
Rupert Comp 830 is a processor that emulates the compressor section built into the top recording
consoles developed by Rupert Neve during the 1980s.
In addition to providing a broad range of control for Attack and Release, this compressor provides
an EQ and filter on the sidechain, giving you an extremely broad range of tone-shaping possibilities,
and letting you create nearly any sound. The compression is transparent and smooth-sounding, and
can be used on any source in any situation. By using VCM technology, this compressor models a
circuit with a further-evolved audio transformer by Rupert Neve. A shiny, colorful, and well-defined
sound can be obtained simply by routing the signal through this processor.
9
1 3
2 4
)
5
6
7 8
1
HPF ON button
Toggles the sidechain's high pass filter on/off.
2
HPF FREQ button
Adjusts the cutoff frequency of the sidechain's high pass filter.
3
LPF ON button
Toggles the sidechain's low pass filter on/off.
4
LPF FREQ knob
Adjusts the cutoff frequency of the sidechain's low pass filter.
5
MF ON button
Toggles the sidechain's MF band (peaking) on/off.
6
MF FREQ x10 button
Switches the sidechain's MF band (peaking) center frequency to 10 times its value.
7
MF FREQ knob
Adjusts the sidechain's MF band (peaking) center frequency.
254
CONTENTS FUNCTION MAP
$
! @ # %
^
RIVAGE PM10 Operation Manual