Yamaha RIVAGE PM10 Operation Manual page 101

Screen Overview  About the OVERVIEW screen
■ SEND field
This field displays the send level, output bus name, and send on/off status for 12
buses.
To select the 12 destination buses, use the MIX/MATRIX SENDS [1-12]/
[13-24]/[25-36]/[37-48]/[49-60]/[61-72] keys on the panel.
Use the screen encoders or the [TOUCH AND TURN] knob to adjust the send
level for each bus. Press the knob of the bus you want to operate to assign the
knob to one of the screen encoders. If it is assigned to the [TOUCH AND
TURN] knob, press the knob once again to open the SENDS TO popup window.
If the channels that are rolled out to a bay are MATRIX channels, press the knob
to open the SENDS FROM popup window.
This field varies depending on the type of destination bus.
If the destination bus is VARI (mono):
The knob color and pointer color indicate the send on/off and pre/post status. If the send is off, the
knob color will turn gray. With the post setting, the knob pointer color will turn black.
Send is On/Post
Send is On/Pre
If the destination bus is VARI (stereo):
If a pair of buses (odd-numbered and even-numbered) are in stereo, the
left-hand knob will function as the PAN knob, and the right-hand knob will
function as the SEND knob.
If the destination bus is set to FIXED:
The SEND ON/OFF button for each bus is shown instead of the knob.
Send is Off/Post
Send is Off/Pre
101
■ TO STEREO field
This field displays the on/off status and pan/balance setting of the signal sent to the STEREO bus.
Press this knob and you will be able to use the screen encoder and the [TOUCH AND TURN] knob
to adjust the value. If you press the knob once again, the TO STEREO popup window
appear.
This field varies depending on the type of the selected channel.
When an input channel or MIX channel is selected:
1 TO STEREO PAN knob
Sets the pan/balance of a signal routed to the STEREO bus.
Press the knob to open the TO STEREO popup window.
2 TO ST A/TO ST B indicators
Indicate the status of a signal sent to the STEREO A bus and
STEREO B bus respectively.
If an input or MIX channel is set to LCR mode, the LCR indicator
will appear.
Σ clipping indicator
3
Lights to indicate that a signal is clipping at some point in the channel.
When MATRIX or STEREO channels are selected:
If STEREO channels are selected, the stereo balance will be displayed.
Also, If MATRIX channels are paired, the balance will be displayed.
The Σ clip indicator will appear if the signal is clipping at some point in the
channel.
■ DCA field
A DCA (1–24) to which the channel is assigned is displayed on the first
and/or second row in this field.
Press this field to open the DCA/MUTE ASSIGN (1CH) popup window
(page 205).
■ Mute group field
A mute group (1–12) to which the channel is assigned is displayed on the third row in this field. If
the channel has been temporarily removed (SAFE) from the mute group, the corresponding
indicator will be highlighted.
Press this field to open the DCA/MUTE ASSIGN (1CH) popup window
CONTENTS FUNCTION MAP
(page 200) will
1 3
(page 210).
RIVAGE PM10 Operation Manual
2
2