Yamaha RIVAGE PM10 Operation Manual page 64

Part Names & Functions  Top panel of the control surface
Touch Screen section (bay L, bay C)
Bay L Bay C
Bay R
1 Touch screen
This is a touch screen that you can operate by touching it with your finger to select menus or
set parameters. Please note that you cannot operate the unit by touching multiple points
simultaneously.
NOTE
• If the touch screens become dirty, wipe them with a soft dry cloth.
• Before use, be sure to remove the transparent film applied to the touch screens to protect
them during transport.
NOTICE
Never use a sharp or pointed object such as your fingernail to operate the touch screens. Doing
so may scratch the screens and render the touch screens inoperable.
Bay
A bay consists of a group of 12 faders
located across the Touch Screen
section and the Channel Strip section.
The CS-R10 contains three bays; the
CS-R10-S contains two bays. You can
control these bays independently.
1
2
3
4
2 [VIEW] key
Recalls and toggles between the OVERVIEW and SELECTED CHANNEL VIEW screens.
3 [MIX]/[MATRIX] keys
Specify the type of the send destination buses displayed on the OVERVIEW screen.
4
[1-12]/[13-24]/[25-36]/[37-48]/[49-60]/[61-72] keys
Enable you to select a bank for the send destination bus displayed on screen.
64
CONTENTS FUNCTION MAP
RIVAGE PM10 Operation Manual