Yamaha RIVAGE PM10 Operation Manual page 159

Monitor  PHONES
2.
Press the PHONES popup button to open the PHONES popup window.
3
1
2
3
1
2
1
MONITOR PHONES POINT button
Select one of the following monitor source points:
• PRE DELAY
• POST DELAY
2
CUE PHONES POINT button
Select one of the following cue source points:
• PRE DELAY
• POST DELAY
3
CENTER CH ON button
If you plan not to monitor the center channel, turn this button off. When this button is off, the
center channel will not be monitored.
4 INSERT button
Indicates the mount status of the currently-selected rack. If nothing is selected, the button will
indicate "BLANK. " Press this button to display the window, in which you can set the insert for
the PHONES signal.
5 INSERT ON button
Switches the insert on or off.
7
6
4
5
6
4
5
159
6 PHONES LEVEL LINK button
If this is on, the MONITOR FADER LEVEL knob will adjust the level of signals sent to the
PHONES A or PHONES B output jack.
7 CLOSE button
Press this button to close the popup window and return to the previous screen.
3.
Use the buttons on screen to make PHONES settings.
4.
When you finish making settings, press the CLOSE button.
CONTENTS FUNCTION MAP
RIVAGE PM10 Operation Manual