Yamaha RIVAGE PM10 Operation Manual page 331

User Setup  USER DEFINED KEYS
■ Functions that can be assigned to USER DEFINED keys
NOTE
Available options in the GPI SETUP popup window
the ability to assign functions to GPI is unavailable in PM10 Editor.
Function PARAMETER 1 PARAMETER 2 PARAMETER 3
NO ASSIGN — —
LATCH
ALTERNATE
FUNCTION
UNLATCH
group A,B,C,D,E OVERRIDE ON
AUTOMIXER
group A,B,C,D,E PRESET ON
A
B
BRIGHTNESS BANK SELECT
C
D
CH
MIX
CH ON SPECIFIC CH MATRIX
STEREO
DCA
INC
DEC
CH
CH SELECT
MIX
SPECIFIC CH MATRIX
STEREO A
STEREO B
CONSOLE
SHUTDOWN
(page 344) are the same as for GPI IN. However,
Description
— No assignment
Each press of the key toggles
Alternate function on/off.
Pressing and holding down the key
switches to Alternate function.
Switches the corresponding group's
OVERRIDE on/off.
Switches the corresponding group's
PRESET on/off.
Selects the bank subject to the
BRIGHTNESS setting.
1–144
1–72
1–36 Switches the channel on/off.
A, B
1–24
Selects the next channel to operate
in the Selected Channel section.
Selects the previous channel to
operate in the Selected Channel
section.
1–144
1-72
Selects the channel specified in the
1–36 list to operate in the Selected
Channel section.
L, R
L, R
Shuts down the control surface.
NOTE
You can shut down the control
surface by pressing and holding
down a USER DEFINED key to which
the Console Shutdown function has
been assigned.
Function PARAMETER 1
OUTPUT
CLEAR CUE
SPECIFIC CH
CUE
CUE MODE
CUE INTERRUPTION
INPUT CUE POINT
DCA CUE POINT
OUTPUT CUE POINT
NEXT
EVENT LIST
PREV
ENABLE
FADER BANK
BAY L, BAY R, BAY C, BAY ALL
SNAPSHOT
LATCH
GAIN KNOB
FUNCTION
UNLATCH
INC
GEQ FREQ
BANK
DEC
331
CONTENTS FUNCTION MAP
PARAMETER 2 PARAMETER 3 Description
A Switches CUE A on/off.
B Switches CUE B on/off.
CUE A Clears CUE A.
CUE B Clears CUE B.
CUE A+B Clears CUE A+B.
CH 1–144
MIX 1–72
MATRIX 1–36 Switches Cue Out on/off.
STEREO A, B
DCA 1–24
A, B Switches Cue mode.
Switches Cue Interruption function
A, B
on/off.
Switches the input channel's cue
A, B
point.
A, B Switches the DCA's cue point.
Switches the output channel's cue
A, B
point.
Directly recalls the event associated
with the next event number.
Directly recalls the event associated
with the previous event number.
Enables or disables an event list.
Bookmarks the current fader layer
and positions on each bay. (Press
and hold down the key for two or
more seconds.)
Alternatively, reverts to the fader
layer or positions that were
bookmarked most recently. (Press
the key and release it within two
seconds.)
Enables you to select analog gain or
BAY L, BAY R, BAY C digital gain for each bay that will be
displayed on the OVERVIEW screen.
Enables you to select gain for each
bay that will be displayed on the
BAY L, BAY R, BAY C OVERVIEW screen. Press this key to
display analog gain, and release the
key to display digital gain.
BAY L, BAY R, BAY C Selects the group of bands (in the
GEQ EDIT screen) that will be
controlled by the faders in the
BAY L, BAY R, BAY C
Channel Strip section.
RIVAGE PM10 Operation Manual