Yamaha RIVAGE PM10 Operation Manual page 75

Bay  Bay Link
Bay Link
A Bay Link function enables you to select and link layers from multiple bays on the control surface.
Normally, each bay with 12 faders operates independently. However, using this function, you can
link and use multiple bays as one bay that features up to 36 faders.
Linkable functions include:
• Fader layer selection
• SENDS ON FADER on/off
• Switching the selection of the channel strip encoders
• Selection of the send destination when the
OVERVIEW screen is active
1.
Press the SETUP button on the menu bar to access the SETUP screen.
2.
Press the PREFERENCES button to access the PREFERENCES popup window.
This window includes several pages, which you can switch between using the tabs located at
the top of the window.
3.
Press the SURFACE SETTINGS1 tab to access the SURFACE SETTINGS1 page.
SURFACE SETTINGS1
Selecting the send
destination
1 BAY LINK
Specifies whether the layers selected from multiple bays will be linked. You can select L+R,
L+C, C+R, or L+C+R.
4.
Use the BAY LINK button to select bays you want to link.
NOTE
• You can select only bays that are linked via CH SEL.
• A link between SCREEN SEL and CH SEL, and the [CUE]-[SEL] LINK setting can be turned
on or off on each bay independently, regardless of the Bay Link status.
75
CONTENTS FUNCTION MAP
1
RIVAGE PM10 Operation Manual