Yamaha RIVAGE PM10 Operation Manual page 363

Setup Procedure and Basic Operation of the RIVAGE PM10 Editor  Off-line editing/synchronization
Once the DSP engine detects PM10 Editor on-line, the DEVICE SYNC screen appears.
When connecting PM10 Editor, you must specify the data sync direction for the DSP engine.
4.
Select "EDITOR  DSP."
5.
Press the SYNC button.
Parameter settings on the RIVAGE PM10 system will be copied to PM10 Editor. Once data
synchronization is completed, the line indicating synchronization is displayed in green.
6.
Edit the mixing data.
Off-line editing/synchronization
You can edit mixing data off-line.
Off-line editing
1.
Start PM10 Editor.
The following screen appears at start-up.
2.
Press the Use Offline button.
3.
Edit the mixing data.
4.
When you finish editing the data, save the setting file using the SAVE/LOAD
screen.
5.
Exit the application.
363
CONTENTS FUNCTION MAP
RIVAGE PM10 Operation Manual