Yamaha RIVAGE PM10 Operation Manual page 110

System Setup  SYSTEM CONFIG
4.
Press each channel assign popup button to access the TWINLANe
CONFIGURATION popup window.
Each settings window contains the following items.
TWINLANe CONFIGURATION popup window
1
1 Tabs
Switch between MIX OUT, ST/MT/MON/CUE/TB, DIRECT OUT 1-72, and DIRECT OUT
73-144.
2
Channel select buttons
Select the channel to edit. The select button will change as follows.
.............Currently not assigned to the TWINLANe network
............Currently assigned to the TWINLANe network
............Currently assigned to the TWINLANe network, and selected for
cancellation.
............Currently not assigned to the TWINLANe network, and selected for
assignment.
2 3 4 5
3 ALL OFF button
When you press this button, all channels assigned to TWINLANe are selected for cancellation
in a single operation.
4 ALL ON button
If you press this button, all channels not assigned to TWINLANe are selected for assignment in
a single operation.
5
REVERT button
If you press this button, all selections for cancellation or for assignment will revert to their
original state.
5.
Select the channels that you want to use on the TWINLANe network.
When you finish making selections, press the CLOSE button to close the window.
6.
Press the APPLY button to apply the channel settings to the TWINLANe
network.
7.
When you finish making assignments, press the × button to close the SYSTEM
CONFIG [DSP] popup window.
If channels are assigned, and you press the × button without pressing the APPLY button, the
following confirmation screen appears.
If you press OK, all selections for cancellation or for assignment will revert to their original
state, and you will return to the SYSTEM CONFIG popup window.
If you press CANCEL, you will return to the SYSTEM CONFIG [DSP] popup window.
Procedure for the control surface
1.
Press the SETUP button on the menu bar to access the SETUP screen.
2.
Press the SYSTEM CONFIG button to access the SYSTEM CONFIG popup
window.
110
CONTENTS FUNCTION MAP
RIVAGE PM10 Operation Manual