Yamaha RIVAGE PM10 Operation Manual page 119

System Setup  SYSTEM CONFIG
■ Specifying the type and number of cards
The following example explains how to add an RY card for use in the I/O rack. Use the same
procedure for adding a different card to a different component.
1.
Press the SETUP button on the menu bar to access the SETUP screen.
2.
Press the SYSTEM CONFIG button to access the SYSTEM CONFIG popup
window.
3.
Press the mounted I/O rack select popup button to access the I/O rack settings
popup window.
I/O rack settings popup window
1
1 RY SLOT (1–6) popup buttons
When you press a button, the RY CARD SELECT popup window appears, in which you can
select an RY card.
2 MY SLOT (1–2) popup buttons
When you press a button, the MY CARD SELECT popup window appears, in which you can
select a Mini-YGDAI card (page
3
HY SLOT (2) popup button
When you press the button, the HY CARD SELECT popup window appears, in which you can
select an HY card (page 121).
4.
Press the RY SLOT popup button to access the RY CARD SELECT popup window.
119
CONTENTS FUNCTION MAP
2 3
120).
RIVAGE PM10 Operation Manual