Yamaha RIVAGE PM10 Operation Manual page 322

User Setup  CUSTOM FADER
CUSTOM FADER BANK popup window (when a bay is selected)
1
2 3
3
CUSTOM FADER BANK popup window (when MASTER is selected)
5
6
9 ) !
4
7 8
5
6
1
7 8
322
1 Bay select buttons
Enable you to select a bay or master faders to which you want to assign a combination of
channels.
• L1.....................................CUSTOM1 of bay L
• L2.....................................CUSTOM2 of bay L
• C1 ....................................CUSTOM1 of bay C
• C2 ....................................CUSTOM2 of bay C
• R1 ....................................CUSTOM1 of bay R
• R2 ....................................CUSTOM2 of bay R
• MASTER ........................Master fader
2 Bank select buttons
Enables you to select a block you want to set up. The selected bank name will appear in the
CHANNEL ASSIGN field.
3 NAME popup buttons
Press one of these buttons to access the NAME popup window, in which you can name the
blocks.
4
Fader assign indicators
Indicate the channels assigned to the corresponding blocks.
5
Fader select button
Enables you to elect the target fader. Press this button to select it, then press [SEL] keys on the
top panel to add the corresponding channels to the selected fader bank.
6 Channel select popup button
Press this button to access the channel select popup window, in which you can select channels
on the touch screen.
7
CLEAR SELECTED button
Clears the current fader assignment.
8
CLEAR BANK button
Clears the current fader bank assignment. Pressing this button will open a confirmation dialog
box. Press OK to clear the assignment. Otherwise, press CANCEL to return to the previous
screen without changing the setting.
9 COPY button
Copies the selected bank setting.
) PASTE button
Paste the copied setting to the selected bank.
! CLOSE button
Press this button to close the popup window and return to the previous screen.
CONTENTS FUNCTION MAP
RIVAGE PM10 Operation Manual