Yamaha RIVAGE PM10 Operation Manual page 339

MIDI/GPI  Using Program Changes to recall scenes
• When the OMNI button is on:
Program changes of all MIDI channels will be received. However, regardless of the MIDI
channel that is received, the scene assigned to the corresponding program number of the Rx
channel will be recalled. Turning on the OMNI button will not change the operation for
Program Change transmission.
• When the BANK button is on:
The CH indication in the list will change to BANK (bank number), and Bank Select
(Control Change #0, #32) and Program Change messages can be transmitted and received.
This can be convenient if you want to control more than 128 scenes on a single MIDI
channel.
When Bank Select and then Program Change messages (in that order) are received on the
Rx channel, the scene assigned to that bank number and program number in the list will be
recalled.
When you recall a specific scene on the RIVAGE PM10 system, Bank Select and Program
Change messages for the bank number and program number assigned to that scene will be
transmitted on the Tx channel. (If the same scene is assigned more than once in the list, the
lowest-numbered bank number and program number will be transmitted.)
NOTE
• The settings of the OMNI and BANK buttons are ignored in Multi mode.
• If the BANK button is on and only a Program Change on an applicable MIDI channel is
received, the last-selected bank number will be used.
• If the BANK button is on, the OMNI button can also be turned on at the same time. In this
case, Bank Select and Program Change messages of all MIDI channels will be received.
5.
Use the buttons in the PROGRAM CHANGE field to turn transmission and
reception on or off, and make settings for echo output.
6.
To assign a scene to each program number, press the desired cell in the
PROGRAM CHANGE ASSIGNMENT column on the list.
The MIDI PROGRAM CHANGE popup window will appear. In this window, you can specify
the scene (to be recalled) that you want to assign to each program number. This popup
window includes the following items.
1
1 TYPE field
Enables you to select the type of event.
The following table lists the events you can select.
NO ASSIGN No assignment
SCENE Scene memory recall operations
2 DESTINATION field
This field will be supported in the future versions. If SCENE is selected, this will indicate - - -.
You do not need to select any item for this field.
3 LIST/DIRECT field
Enables you to select the scene you want to recall.
• LIST ................................Press this field so that you will be
able to select a scene number
from the list.
• DIRECT .........................Press this field so that you will be
able to select a scene by entering
the scene number directly into
the field.
339
CONTENTS FUNCTION MAP
2 3
RIVAGE PM10 Operation Manual