Yamaha RIVAGE PM10 Operation Manual page 204

Channel Job  About DCAs
2 DCA select buttons
Enable you to select a target DCA.
3 NAME EDIT popup button
Indicates the name of the currently-selected DCA. Press this button to display the keyboard
window or icon edit window, in which you can edit the DCA name.
4 DCA assign popup field
Highlights in yellow the channels that are assigned to the currently-selected DCA.
Press this field to open the assign popup window.
5
CLEAR ALL button
Press this button to clear all selections.
6
SET BY SEL button
If this button is on, you will be able to add a channel by using the corresponding [SEL] key. To
select more channels, turn the SET BY SEL button on, and then press the corresponding [SEL]
keys for the desired channels.
7 LIBRARY button
Press this button to open the DCA NAME/ASSIGN library window.
8 CLOSE button
Press this button to close the popup window and return to the previous screen.
2.
Use the DCA select buttons to select the DCA to which you want to assign
channels.
3.
Press the DCA assign popup field to open the DCA ASSIGN popup window.
DCA ASSIGN popup window
1 2
1
Switching tabs
Enable you to switch between the input channel page and output channel page.
2
Channel select buttons
Enable you to select the channels that will be assigned to a DCA.
3
SET BY SEL button
If this button is on, you will be able to select a channel by using the corresponding [SEL] key.
4
CLEAR ALL button
Press this button to clear all selections.
5
CLOSE button
Press this button to close the popup window and return to the previous screen.
4.
In the DCA ASSIGN popup window, select the channels that will be assigned to a
DCA (multiple selections are allowed).
5.
Assign channels to other DCAs in the same way.
NOTE
You can assign a single channel to more than one DCA. In this case, the value will be the sum of
the levels of all assigned DCA faders.
6.
When you finish assigning the channels, press the CLOSE button to close the
popup window.
The DCA/MUTE ASSIGN field of the
OVERVIEW screen indicates the DCA(s) to
which each channel is assigned. Indicators that
are lit yellow in the upper and middle row of
this field indicate the DCAs to which the
corresponding channel belongs.
204
CONTENTS FUNCTION MAP
3 4 5 1 2
RIVAGE PM10 Operation Manual
3 4 5