Yamaha RIVAGE PM10 Operation Manual page 328

User Setup  USER DEFINED KNOBS
3.
Press a button in the CH STRIP ENCODERS field to open the CH STRIP
ENCODERS popup window.
4.
Use the screen encoder to select the function that you want to assign.
You can assign the following functions:
• PAN/BALANCE
• ANALOG GAIN
• DIGITAL GAIN
• SELECTED SEND
• MIX 1–72 SEND
• MATRIX 1–36 SEND
• HPF FREQUENCY
• LPF FREQUENCY
• DYNAMICS1 THRESHOLD
• DYNAMICS2 THRESHOLD
• DELAY
• SILK TEXTURE
5.
Press the OK button to close the CH STRIP ENCODERS popup window.
6.
Use the UP []/DOWN [] keys on the top panel
to select the function.
328
CONTENTS FUNCTION MAP
RIVAGE PM10 Operation Manual