Yamaha RIVAGE PM10 Operation Manual page 178

CH Parameter  DYNAMICS
If the dynamics processor is any type other than GATE, the threshold setting is indicated as a
horizontal line in the meter area.
Type = Any type Type = GATE
other than GATE
If GATE is selected as the dynamics processor type, the indicator status means the following:
Gate status
indicator
Red
On/Off status On
Open/Close status Close
Amount of gain 30 dB or higher
reduction
3 Tabs
Use these tabs to select a channel that you want to view on the screen.
Yellow Green Dark
On On Off
Open Open —
Lower than 30 dB 0 dB —
■ Controlling the dynamics processor via the SELECTED CHANNEL VIEW
screen
1.
Press the [VIEW] key to access the SELECTED CHANNEL VIEW screen.
SELECTED CHANNEL VIEW screen
2.
Select the channel that you want to operate.
3.
Press the DYNAMICS field to access the DYNAMICS 1/2 popup window
(page 176).
4.
Use the corresponding screen encoder or the [TOUCH AND TURN] knob to
adjust the EQ parameters.
178
CONTENTS FUNCTION MAP
DYNAMICS field
RIVAGE PM10 Operation Manual