Yamaha RIVAGE PM10 Operation Manual page 305

OVERLAY  Using the Overlay function
OVERLAY
Overlay is a function that enables you to add or "overlay" a temporary offset (+/-) value to fader
levels or Mix/Matrix send levels in a current mix.
The "overlaid" value is something like a transparent filter applied to the level values. It enables you to
temporarily adjust the relative levels without modifying existing scene data.
Using the Overlay function
■ Controlling the function using the keys and knobs on the top panel
1
2
1 [OVERLAY] key
Press this button to display the
OVERLAY SETTING screen.
While pressing and holding down the
[SHIFT] key, press the [OVERLAY] key
to switch Overlay on or off.
While Overlay is turned on, press and
hold down the [OVERLAY] key to enter
Overlay edit mode.
2 [SHIFT] key
Combine with another key to perform
certain functions.
3
4
6
305
CONTENTS FUNCTION MAP
3 [ON] key
Switches the channel on or off.
4 [FADER] knob
Adjusts the channel fader level.
5 MIX/MATRIX SENDS knobs
Adjust the send levels for the
corresponding buses.
6 MIX/MATRIX SENDS [ON] keys
Switch the send signal to the
corresponding bus on or off.
5
RIVAGE PM10 Operation Manual